2014 Hilux · Service Manual BRAKE

REMOVAL

Removal / installation · Vehicles built Jun 2011 – Jul 2012

Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery to disable the SRS system.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


2. REMOVE COMBINATION METER ASSEMBLY
  1. Remove the combination meter (Click here).


3. DISCONNECT BRAKE MASTER CYLINDER PUSH ROD CLEVIS
  1. Disconnect the stop light switch connector.

  1. C226773E01
    Remove the return spring.

  1. Remove the clip and clevis pin.

  1. Disconnect the push rod clevis from the brake pedal.


4. REMOVE BRAKE PEDAL SUPPORT SUB-ASSEMBLY

  1. C226772
    for 1KD-FTV and 2KD-FTV with Manual Transmission:
    Detach the connector clamp and clamp from the brake pedal support sub-assembly.

  1. C228311E01
    Remove the bolt from the support.

  1. C111300
    Remove the 4 nuts and support.

← COMPONENTS (from Jun 2011)REMOVAL (Aug 2012 – Jul 2013) →