REMOVAL
Removal / installation · Vehicles built Aug 2012 – Jul 2013
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013
| 1.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
 |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery to disable the SRS system.
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 2.
REMOVE COMBINATION METER ASSEMBLY |
 |
Remove the combination meter (Click here).
| 3.
DISCONNECT BRAKE MASTER CYLINDER PUSH ROD CLEVIS |
 |
Disconnect the stop light switch connector.
- Remove the return spring.
Remove the clip and clevis pin.
Disconnect the push rod clevis from the brake pedal.
| 4.
REMOVE BRAKE PEDAL SUPPORT SUB-ASSEMBLY |
 |
- for 1KD-FTV and 2KD-FTV with Manual Transmission:
Detach the connector clamp and clamp from the brake pedal support sub-assembly.
- Remove the bolt from the support.
- Remove the 4 nuts and support.