REMOVAL
Removal / installation · Vehicles built from Jun 2011
| 1. DRAIN BRAKE FLUID |
- NOTICE:
- Wash off brake fluid immediately if it comes in contact with any painted surface.
| 2. DISCONNECT NO. 2 LOAD SENSING SPRING SHACKLE |
![]() ![]() |
Remove the bolt, collar and 2 cushions.
Disconnect the shackle from the rear differential.
| 3. REMOVE LOAD SENSING PROPORTIONING VALVE ASSEMBLY |
![]() ![]() |
Using a union nut wrench, disconnect the 3 brake lines from the valve body.
Remove the 3 bolts and valve.



