2014 Hilux · Service Manual BRAKE

REMOVAL

Removal / installation · Vehicles built Aug 2012 – Jul 2013

Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013


1. PRECAUTION

NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


3. REMOVE CONSOLE BOX ASSEMBLY
(Click here)

4. REMOVE PARKING BRAKE LEVER COVER

5. REMOVE PARKING BRAKE LEVER SUB-ASSEMBLY

  1. C237675E01
    Remove the lock nut and No. 1 parking brake cable adjusting nut.
    Text in Illustration 
    *1
    Lock Nut
    *2
    No. 1 Parking Brake Cable Adjusting Nut

  1. C237673
    Remove the 2 bolts and lever (with the No. 1 parking brake cable).

  1. C237678E01
    Bend the claw so that the No. 1 parking brake cable can be removed.
    Text in Illustration 
    *1
    Claw

  1. C238705
    Remove the 2 bolts and 2 nuts.

  1. Disconnect the cable from the lever.

  1. C237685
    Disconnect the parking brake switch connector.

  1. Remove the screw and switch from the lever.

← REMOVAL (Jun 2011 – Jul 2012)REMOVAL (from Aug 2013) →