2014 Hilux · Service Manual TRANSMISSION

INSPECTION

Inspection · Vehicles built from Jun 2011


INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY

G026080E06
  1. AT Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Shift Lever Position
    Specified Condition
    4 (B) - 5 (L)
    P or N
    Below 1 Ω
    4 (B) - 5 (L)
    Not in P or N
    10 kΩ or higher
    1 (RL) - 2 (RB)
    R
    Below 1 Ω
    1 (RL) - 2 (RB)
    Not in R
    10 kΩ or higher
    2 (RB) - 7 (DL)
    D or 4
    Below 1 Ω
    2 (RB) - 7 (DL)
    Not in D or 4
    10 kΩ or higher
    2 (RB) - 3 (2L)
    3
    Below 1 Ω
    2 (RB) - 3 (2L)
    Not in 3
    10 kΩ or higher
    2 (RB) - 8 (LL)
    2 or L
    Below 1 Ω
    2 (RB) - 8 (LL)
    Not in 2 or L
    10 kΩ or higher

    If the result is not as specified, replace the switch assembly.

← REMOVAL (from Jun 2011)ADJUSTMENT (from Jun 2011) →