2014 Hilux · Service Manual TRANSMISSION

INSPECTION

Inspection · Vehicles built from Jun 2011


INSPECT AUTOMATIC TRANSMISSION FLUID TEMPERATURE SENSOR

C169604E02
  1. Measure the resistance of the temperature sensor.

    Standard resistance:
    Tester Connection
    Specified Condition
    1 - 2
    79 Ω to 156 kΩ
    1 - Body ground
    1 MΩ or higher
    2 - Body ground
    1 MΩ or higher

    HINT:
    If the resistance is out of the specified range for either of the ATF temperatures shown in the table below, the driveability of the vehicle may decrease.

    Standard resistance:
    ATF Temperature
    Specified Condition
    20°C (68°F)
    10.3 to 13.9 kΩ
    110°C (230°F)
    0.58 to 0.65 kΩ

← REMOVAL (from Jun 2011)INSTALLATION (Jun 2011 – Jul 2013) →