2014 Hilux · Service Manual TRANSMISSION

INSTALLATION

Removal / installation · Vehicles built Jun 2011 – Jul 2013

Versions by build date: Jun 2011 – Jul 2013 from Aug 2013


1. INSTALL AUTOMATIC TRANSMISSION FLUID TEMPERATURE SENSOR
  1. Coat a new O-ring with ATF and install it to the temperature sensor.

  1. C118023E01
    Using a 19 mm union nut wrench, install the ATF temperature sensor.

    Torque:
    29 N*m{ 300 kgf*cm , 22 ft.*lbf }

    NOTICE:
    Use the formula to calculate special torque values for situations where a union nut wrench is combined with a torque wrench (Click here).

  1. Attach the ATF temperature sensor connector clamp to the wire harness bracket.

  1. Connect the ATF temperature sensor connector.


2. CHECK AUTOMATIC TRANSMISSION FLUID
  1. Check the automatic transmission fluid (Click here).

← INSPECTION (from Jun 2011)INSTALLATION (from Aug 2013) →