REMOVAL
Removal / installation · Vehicles built from Jun 2011
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
| 2. REMOVE PARKING BRAKE HOLE COVER SUB-ASSEMBLY |
Remove the parking brake hole cover (Click here).
| 3. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY |
Remove the upper console panel (Click here).
| 4. REMOVE CONSOLE BOX ASSEMBLY |
Remove the console box (Click here).
| 5. REMOVE FLOOR SHIFT ASSEMBLY |
![]() ![]() |
Disconnect the 2 connectors and clamp.
Move the shift lever to L.
Disconnect the transmission control cable.
Remove the 4 bolts.

Remove the floor shift.

