DISPOSAL
Removal / installation · Vehicles built Jun 2011 – Jul 2012
Versions by build date: Jun 2011 – Jul 2012 from Aug 2012
| 1. DISPOSE OF FRONT SHOCK ABSORBER ASSEMBLY LH |
- HINT:
- Use the same procedure for the other front shock absorber.
Fully extend the shock absorber piston rod and fix the shock absorber in place at an angle in a vise or similar tool.

Text in Illustration *a
Approximately 45 mm
Using a drill or similar tool, slowly make a hole approximately 45 mm (1.77 in.) from the top end of the shock absorber and discharge the gas inside of it.
- NOTICE:
- The gas is colorless, odorless and harmless.
- Since the discharged gas may cause chips to fly off, cover the drill with a cloth when making a hole.
- The gas is colorless, odorless and harmless.
