2014 Hilux · Service Manual TRANSMISSION

REMOVAL

Removal / installation · Vehicles built from Jun 2011


1. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY
(Click here)

2. REMOVE COMBINATION METER ASSEMBLY
(Click here)

3. DISCONNECT CLUTCH MASTER CYLINDER PUSH ROD CLEVIS

C113186
  1. w/o Turn Over:
    Disconnect the clutch pedal spring from the clevis pin and clutch pedal support and remove it.

  1. Remove the clip and clevis pin and disconnect the clutch master cylinder push rod clevis.


4. REMOVE CLUTCH PEDAL ASSEMBLY

C223738
  1. w/ Clutch Switch:
    Disconnect the clutch switch connector.

  1. Remove the bolt, 2 nuts and clutch pedal.

← COMPONENTS (from Jun 2011)DISASSEMBLY (from Jun 2011) →