Removal / installation · Vehicles built from Jun 2011
NOTICE:
Take extra care when handling these precision electronic components.
1.
REMOVE TRANSMITTER HOUSING COVER
Twist a screwdriver in the direction of the arrow in the illustration and open the transmitter housing cover.
NOTICE:
Do not forcibly pry open the cover.
HINT:
Tape the screwdriver tip before use.
Text in Illustration
*1
Protective Tape
2.
REMOVE DOOR CONTROL TRANSMITTER MODULE
Using a precision screwdriver, remove the door control transmitter module.
HINT:
Tape the screwdriver tip before use.
Text in Illustration
*1
Protective Tape
3.
REMOVE TRANSMITTER BATTERY
Detach the 2 claws and remove the transmitter battery cover.
NOTICE:
When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.
Using a precision screwdriver, remove the battery (lithium battery: CR2016).
NOTICE:
Do not push the terminals with your finger.
Do not forcibly pry up the battery. The terminals may become damaged.
Do not touch the battery with wet hands. Water may cause rust.
Do not touch or move any components inside the transmitter. Doing so may interfere with proper operation.
When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.