2014 Hilux · Service Manual BODY ELECTRICAL

INSTALLATION

Removal / installation · Vehicles built from Jun 2011

NOTICE:
Take extra care when handling these precision electronic components.


1. INSTALL TRANSMITTER BATTERY

  1. B262357
    Install the battery (lithium battery: CR2016) with the positive (+) side facing upward as shown in the illustration.

    NOTICE:
    1. Do not bend the transmitter battery electrode during insertion.
    2. Keep the transmitter cover interior free of dust and oil.
    3. When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.

  1. B262358
    Attach the 2 claws to install the transmitter battery cover.


2. INSTALL DOOR CONTROL TRANSMITTER MODULE

  1. B262359
    Install the door control transmitter module.


3. INSTALL TRANSMITTER HOUSING COVER

  1. B262360
    Install the transmitter housing cover to the transmitter housing case.

  1. Check that the transmitter LED illuminates 3 times when a switch is pressed 3 times.

← REMOVAL (from Jun 2011)INSPECTION (from Jun 2011) →