INSTALLATION
Removal / installation · Vehicles built from Jun 2011
| 1. INSTALL WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY |
Install the windshield washer motor and pump to the packing of the washer jar.

| 2. INSTALL WINDSHIELD WASHER JAR ASSEMBLY |
Install the windshield washer jar and pump with the 3 bolts. Then attach the 2 clamps.

- Torque:
- 5.5 N*m{ 56 kgf*cm , 49 in.*lbf }
Connect the connector and washer hose.
Install the grommet.
| 3. FILL WASHER JAR AND PUMP ASSEMBLY WITH WASHER FLUID |
Fill the washer jar with washer fluid.
| 4. INSTALL FRONT BUMPER COVER |
w/ Fog Light:
Connect the 2 fog light connectors.
w/ Headlight Cleaner System:
Connect the No. 1 headlight cleaner hose.
Attach the 6 claws to install the front bumper cover.
Install the 5 clips, 2 bolts and 2 screws.
Install the 3 clips and 6 screws.
| 5. INSTALL RADIATOR GRILLE |
Attach the 6 claws to install the radiator grille.
Install the 2 screws and 2 clips.
| 6. INSTALL WASHER INLET SUB-ASSEMBLY |
Install the washer inlet of the washer jar and pump to the windshield washer jar and pump.

Install the washer inlet of the washer jar and pump with the clip.

