REMOVAL
Removal / installation · Vehicles built from Jun 2011
| 1. REMOVE WASHER INLET SUB-ASSEMBLY |
Remove the clip.

Pull the washer inlet of the washer jar and pump upward. Then remove it from the windshield washer jar and pump.
| 2. REMOVE RADIATOR GRILLE |
Put protective tape around the radiator grille.

Text in Illustration *1
Protective Tape
Remove the 2 clips and 2 screws.
Detach the 6 claws and remove the radiator grille.

| 3. REMOVE FRONT BUMPER COVER |
Remove the 3 clips and 6 screws.

Put protective tape around the front bumper cover.

Text in Illustration *1
Protective Tape
Remove the 2 bolts, 2 screws and 5 clips.
w/ Fog Light:
Disconnect the 2 fog light connectors.
w/ Headlight Cleaner System:
Disconnect the No. 1 headlight cleaner hose.
Detach the 6 claws and remove the front bumper cover.

| 4. DRAIN WASHER FLUID |
Disconnect the washer hose from the windshield washer motor and pump, and drain the washer fluid.
Disconnect the washer hose from the windshield washer motor and pump, and drain the washer fluid.

- HINT:
- Use a container to collect the washer fluid.
| 5. REMOVE WINDSHIELD WASHER JAR ASSEMBLY |
Remove the grommet.

Disconnect the connector and washer hose.

Detach the 2 clamps and remove the 3 bolts. Then remove the washer jar and pump.
| 6. REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY |
Pull out the washer motor and pump from the packing of the washer jar.

