REASSEMBLY
Removal / installation · Vehicles built from Jun 2011
| 1. INSTALL REAR SPRING LEAF BUSH (except TMT Made Single Cab) |
Using SST and a press, install a new bush to the rear No. 1 leaf spring.

- SST
- 09631-12090
09632-36010
| 2. INSTALL REAR SPRING SILENCER |
Install the 4 rear spring silencers to the leaf spring.
| 3. REASSEMBLE REAR SPRING ASSEMBLY |
Install the No. 1 spring spacer to the leaf spring.
for TMT Made Extra Cab:
Install the 2 rear No. 3 spring spacers to the leaf spring.
for TMT Made Double Cab:
Install the rear No. 3 spring spacer to the leaf spring.
for TSAM Made:
Install the 3 rear No. 3 spring spacers to the leaf spring.
Secure the springs with a vise and install the center bolt and nut.
- Torque:
- 42 N*m{ 425 kgf*cm , 31 ft.*lbf }
Using a vise, caulk the 4 clips.

Check that there is no gap between the spring clip and spring.
| 4. INSTALL REAR LEAF SPRING SHACKLE UPPER BUSH |
Install 2 new bushes to the vehicle body.
| 5. INSTALL REAR LEAF SPRING SHACKLE LOWER BUSH |
Install 2 new bushes to the spring side.
| 6. INSTALL REAR LEAF SPRING PIN BUSH |
Install 2 new bushes to the spring side.
