2014 Hilux · Service Manual SUSPENSION & AXLE

DISASSEMBLY

Removal / installation · Vehicles built from Jun 2011


1. REMOVE REAR LEAF SPRING SHACKLE LOWER BUSH
  1. Using a screwdriver, remove the 2 bushes from the spring shackle or spring.


2. REMOVE REAR LEAF SPRING SHACKLE UPPER BUSH
  1. Using a screwdriver, remove the 2 bushes from the spring shackle or vehicle body.


3. DISASSEMBLE REAR SPRING ASSEMBLY

  1. C236367
    Secure the rear leaf spring assembly in a vise between aluminum plates.

  1. Using a brass bar and hammer, pry open the 4 spring clips of the rear No. 3 leaf spring.

    NOTICE:
    Do not damage the leaf spring.

  1. C236368
    Secure the spring with a vise as shown in the illustration.

  1. Remove the nut and center bolt.

  1. for TSAM Made Double Cab:
    Remove the 3 rear spring leaf spacers.

  1. for TMT Made:
    Remove the 2 rear No. 3 spring spacers.

  1. Remove the No. 1 spring spacer.


4. REMOVE REAR SPRING SILENCER
  1. Remove the 4 rear spring silencers from the leaf spring.


5. REMOVE REAR SPRING LEAF BUSH
  1. Fix the spring with a vise.

  1. C236362
    Using a metal saw, cut the both ends of the bush.

  1. C236363E01
    Using SST and a press, press out the 2 bushes.
    SST
    09950-60010   (09951-00350)
    09950-70010   (09951-07100)

  1. C236364
    Using a chisel and hammer, tap out the 2 outer tubes.

← REMOVAL (from Jun 2011)INSPECTION (from Jun 2011) →