REMOVAL
Removal / installation · Vehicles built Jun 2011 – Jul 2012
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013
- HINT:
- Use the same procedures for the LH side and RH side.
- The procedures listed below are for the LH side.
- A bolt without a torque specification is shown in the standard bolt chart (Click here).
| 1.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
 |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
| 2.
REMOVE REAR SEAT CUSHION ASSEMBLY LH (for Extra Cab)
|
 |
- Operate the rear seat cushion lock hook release lever and pull up the rear seat cushion assembly LH to detach the hook.
Text in Illustration
 
|
Pull Up
|
 
|
Release
|
- Detach the 2 hooks and rear seat cushion assembly LH.
| 3.
REMOVE REAR SEAT CUSHION ASSEMBLY RH (for Extra Cab)
|
 |
- HINT:
- Use the same procedures described for the LH side.
| 4.
REMOVE REAR SEAT ASSEMBLY (for Double Cab) |
 |
Remove the rear seat assembly (Click here).
| 5.
REMOVE QUARTER INSIDE TRIM BOARD LH (for Extra Cab) |
 |
Remove the bolt and anchor.
- Remove the bolt and rear No. 1 seat belt anchor.
Remove quarter inside trim board (Click here).
| 6.
REMOVE REAR SEAT ASSEMBLY (for Double Cab)
|
 |
Pull the rear seat hinge cover LH to detach the 2 claws.
Text in Illustration
 
|
Pull
|
 
|
Pull Up
|
Pull up the rear seat hinge cover LH to detach the guide and remove the rear seat hinge cover LH.
| 7.
REMOVE REAR DOOR SCUFF PLATE LH (for Double Cab)
|
 |
Detach the claw and 3 clips and remove the lower quarter trim panel.
| 8.
REMOVE REAR DOOR OPENING TRIM LH (for Double Cab) |
|
| 9.
REMOVE QUARTER TRIM PANEL LOWER LH (for Double Cab)
|
 |
Detach the claw and 3 clips and remove the lower quarter trim panel.
| 10.
REMOVE REAR NO. 1 SEAT BELT ASSEMBLY OUTER LH |
 |
Remove the bolt and floor anchor.
- Using a screwdriver, detach the 2 claws and open the seat belt anchor cover.
- HINT:
- Tape the screwdriver tip before use.
Remove the bolt.
- Remove the bolt and seat belt.