2014 Hilux · Service Manual TRANSMISSION

REASSEMBLY

Removal / installation · Vehicles built Jun 2011 – Jul 2013


1. INSTALL RELEASE CYLINDER BLEEDER PLUG

Torque:
11 N*m{ 112 kgf*cm , 8 ft.*lbf }


2. INSTALL CLUTCH RELEASE CYLINDER KIT
  1. Install the bleeder plug cap to the bleeder plug.

  1. Install a new spring to the cylinder body.

  1. CL00672E01
    Apply lithium soap base glycol grease to the areas indicated by the arrows in the illustration.

  1. Install the piston to the cylinder body.

    NOTICE:
    Be careful not to damage the inside of the cylinder body.

  1. Install the push rod to the boot.

  1. Install the boot (with push rod) to the cylinder body.

← DISASSEMBLY (Jun 2011 – Jul 2013)INSTALLATION (Jun 2011 – Jul 2013) →