2014 Hilux · Service Manual RESTRAINTS

INSTALLATION

Removal / installation · Vehicles built from Jun 2011

HINT:
  1. Use the same procedures for the RHD and LHD vehicles.
  2. The procedures listed below are for the LHD vehicles.
  3. A bolt without a torque specification is shown in the standard bolt chart (Click here).


1. INSTALL FRONT SEAT INNER BELT ASSEMBLY RH

B125116E01
  1. Install the front seat inner belt assembly RH with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }


2. INSTALL FRONT SEAT ASSEMBLY (for Bench Seat Type)
  1. Install the front seat assembly (Click here).

← REMOVAL (from Jun 2011)PRECAUTION (Jun 2011 – Jul 2012) →