2014 Hilux · Service Manual ENGINE

INSTALLATION

Removal / installation · Vehicles built from Jun 2011


1. INSTALL FAN & GENERATOR V BELT (w/o Air Conditioning System)

  1. A115631E01
    Install the V belt.

  1. Using a bar, adjust the tension of the V belt.

  1. Tighten the bolts A and B.

    Torque:
    Bolt A:
    75 N*m{ 765 kgf*cm , 55 ft.*lbf }
    Bolt B:
    18 N*m{ 185 kgf*cm , 13 ft.*lbf }

  1. Check the deflection of the V belt (Click here).


2. INSTALL FAN & GENERATOR V BELT (w/ Air Conditioning System)

  1. A115632E01
    Install the V belt.

  1. Tightening the bolt C, adjust the deflection of the V belt.

  1. Tighten the bolts A and B.

    Torque:
    Bolt A:
    75 N*m{ 765 kgf*cm , 55 ft.*lbf }
    Bolt B:
    18 N*m{ 185 kgf*cm , 13 ft.*lbf }

  1. Check the deflection of the V belt (Click here).


3. INSTALL COOLER COMPRESSOR V BELT (w/ Air Conditioning System)

  1. A121093E02
    Install the V belt.

  1. Tightening the bolt B, adjust the tension of the V belt.

  1. Tighten nut A.

    Torque:
    39 N*m{ 400 kgf*cm , 29 ft.*lbf }

  1. Check the tension of the V belt (Click here).


4. INSTALL VANE PUMP V BELT

  1. A121092E01
    Install the V belt.

  1. Using a bar, adjust the tension of the V-ribbed belt.

  1. Tighten the bolt A and nut B.

    Torque:
    Bolt (A):
    48 N*m{ 489 kgf*cm , 35 ft.*lbf }
    Nut (B):
    64 N*m{ 635 kgf*cm , 47 ft.*lbf }

  1. Check the tension of the V belt (Click here).

← REMOVAL (from Jun 2011)ADJUSTMENT (from Jun 2011) →