2014 Hilux · Service Manual HEATER & AIR CONDITIONING SYSTEM

DISASSEMBLY

Removal / installation · Vehicles built Aug 2012 – Jul 2013

Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013

HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.


1. REMOVE AIR CONDITIONING AMPLIFIER ASSEMBLY

  1. E226174E01
    Detach the clamp.

  1. Disconnect the connector.

  1. Remove the screw and air conditioning amplifier assembly.

    Text in Illustration 
    *1
    Screw


2. REMOVE BLOWER ASSEMBLY

  1. E226179
    Remove the 3 screws and blower assembly.


3. REMOVE QUICK HEATER ASSEMBLY (w/ PTC Heater)

  1. E230796
    Detach the 2 clamps.

  1. Remove the 2 screws and quick heater assembly.


4. REMOVE HEATER RADIATOR UNIT SUB-ASSEMBLY

  1. E173260
    Remove the screw and heater radiator unit sub-assembly.


5. REMOVE AIR MIX DAMPER CONTROL CABLE SUB-ASSEMBLY

  1. E226086
    Detach the 3 claws and remove the air mix damper control cable sub-assembly.


6. REMOVE HEATER CONTROL CABLE SUB-ASSEMBLY

  1. E226215
    Detach the 3 claws and remove the heater control cable sub-assembly.


7. REMOVE NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY

  1. E226116
    Remove the 4 screws.

  1. Detach the 3 claws and remove the cover.

  1. E212974
    Detach the clamp.

  1. Remove the No. 1 cooler evaporator sub-assembly from the case.


8. REMOVE COOLER EXPANSION VALVE

  1. E225050
    Using a 4 mm socket hexagon wrench, remove the 2 hexagon bolts.

  1. Remove the cooler expansion valve and 2 O-rings from the cooler evaporator.


9. REMOVE NO. 1 COOLER THERMISTOR

  1. E173254
    Remove the No. 1 cooler thermistor (front evaporator temperature sensor).

← DISASSEMBLY (Jun 2011 – Jul 2012)DISASSEMBLY (from Aug 2013) →