2014 Hilux · Service Manual HEATER & AIR CONDITIONING SYSTEM

DISASSEMBLY

Removal / installation · Vehicles built from Aug 2013

Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013

HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.


1. REMOVE BLOWER ASSEMBLY

  1. E226179
    Remove the 3 screws and blower assembly.


2. REMOVE QUICK HEATER ASSEMBLY (w/ PTC Heater)

  1. E230796
    Detach the 2 clamps.

  1. Remove the 2 screws and quick heater assembly.


3. REMOVE HEATER RADIATOR UNIT SUB-ASSEMBLY

  1. E173260
    Remove the screw and heater radiator unit subassembly.


4. REMOVE AIR MIX DAMPER SERVO SUB-ASSEMBLY

  1. E173249
    Remove the 3 screws and damper servo.


5. REMOVE MODE DAMPER SERVO SUB-ASSEMBLY

E225044E01
  1. Detach the claw and remove the lever.

    Text in Illustration 
    *1
    Lever

  1. E225045
    Remove the 3 screws and mode damper servo subassembly.


6. REMOVE NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY

  1. E226116
    Remove the 4 screws.

  1. Detach the 3 claws and remove the lower heater case.

  1. E173253
    Detach the clamp and remove the No. 1 cooler evaporator sub-assembly.


7. REMOVE COOLER EXPANSION VALVE

  1. E225050
    Using a 4 mm socket hexagon wrench, remove the 2 hexagon bolts.

  1. Remove the cooler expansion valve and 2 O-rings from the cooler evaporator.


8. REMOVE NO. 1 COOLER THERMISTOR

  1. E173254
    Remove the No. 1 cooler thermistor (front evaporator temperature sensor).

← DISASSEMBLY (Aug 2012 – Jul 2013)REASSEMBLY (Jun 2011 – Jul 2012) →