INSTALLATION
Removal / installation · Vehicles built Jun 2011 – Jul 2012
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013
| 1. INSTALL NO. 1 COOLER THERMISTOR |
![]() ![]() |
- NOTICE:
- If reusing the evaporator, do not insert the sensor at a location where the sensor was previously inserted. Insert the sensor within range C shown in the illustration.
Insert the No. 1 cooler thermistor (front evaporator temperature sensor) as shown in the illustration to install it.
| 2. INSTALL NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY |
for Automatic Air Conditioning System:
(Click here)
for Manual Air Conditioning System:
(Click here)
| 3. INSTALL AIR CONDITIONING UNIT ASSEMBLY |
for Automatic Air Conditioning System:
(Click here)
for Manual Air Conditioning System:
(Click here)


