2014 Hilux · Service Manual HEATER & AIR CONDITIONING SYSTEM

INSTALLATION

Removal / installation · Vehicles built Aug 2012 – Jul 2013

Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013

HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.


1. CONNECT AIR MIX DAMPER CONTROL CABLE SUB-ASSEMBLY (w/ Heater)

E226071
  1. Attach the 2 claws to connect the air mix control cable sub-assembly.


2. CONNECT HEATER CONTROL CABLE SUB-ASSEMBLY

E225080
  1. Attach the 2 claws to install the heater control cable sub-assembly.


3. CONNECT AIR INLET DAMPER CONTROL CABLE SUB-ASSEMBLY

E225081
  1. Attach the 2 claws to install the air inlet damper control cable sub-assembly.


4. INSTALL AIR CONDITIONING CONTROL ASSEMBLY
  1. Connect the connector and install the air conditioning control assembly.


5. INSTALL HEATER CONTROL KNOB

E225818
  1. Install the heater control knob as shown in the illustration.


6. INSTALL NO. 2 HEATER CONTROL KNOB

E225819
  1. Install the No. 2 heater control knob as shown in the illustration.


7. INSTALL COOLER SWITCH
  1. Attach the 2 claws to install the cooler switch (air conditioning switch).


8. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY
  1. for Manual Air Conditioning System:

    1. Connect the connectors.

    2. Attach the 4 claws to connect the air conditioner control.

    3. Attach the 10 claws and 4 clips to install the center instrument cluster finish panel.

  1. for Automatic Air Conditioning System:

    1. Connect the connectors.

    2. Attach the 8 claws and 4 clips to install the center instrument cluster finish panel.

← INSTALLATION (Jun 2011 – Jul 2012)INSTALLATION (from Aug 2013) →