INSTALLATION
Removal / installation · Vehicles built Jun 2011 – Jul 2012
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013
- HINT:
- Use the same procedure for RHD and LHD vehicles.
- The procedure listed below is for LHD vehicles.
- Use the same procedure for RHD and LHD vehicles.
| 1. CONNECT AIR MIX DAMPER CONTROL CABLE SUB-ASSEMBLY (w/ Heater) |
![]() ![]() |
Attach the 2 claws to connect the air mix control cable sub-assembly.
| 2. CONNECT HEATER CONTROL CABLE SUB-ASSEMBLY |
![]() ![]() |
Attach the 2 claws to install the heater control cable sub-assembly.
| 3. CONNECT AIR INLET DAMPER CONTROL CABLE SUB-ASSEMBLY |
![]() ![]() |
Attach the 2 claws to install the air inlet damper control cable sub-assembly.
| 4. INSTALL AIR CONDITIONING CONTROL ASSEMBLY |
Connect the connector and install the air conditioning control assembly.
| 5. INSTALL HEATER CONTROL KNOB |
![]() ![]() |
Install the heater control knob as shown in the illustration.
| 6. INSTALL NO. 2 HEATER CONTROL KNOB |
![]() ![]() |
Install the No. 2 heater control knob as shown in the illustration.
| 7. INSTALL COOLER SWITCH |
Attach the 2 claws to install the cooler switch (air conditioning switch).
| 8. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY |
for Manual Air Conditioning System:
Connect the connectors.
Attach the 4 claws to connect the air conditioner control.
Attach the 10 claws and 4 clips to install the center instrument cluster finish panel.
for Automatic Air Conditioning System:
Connect the connectors.
Attach the 8 claws and 4 clips to install the center instrument cluster finish panel.






