INSPECTION
Inspection · Vehicles built from Jun 2011
| INSPECT AIR CONDITIONING CONTROL ASSEMBLY |
Measure the resistance according to the value(s) in the table below.

- Standard Resistance:
Tester Connection
Switch Condition
Specified Condition
1 - 2 - 4 - 5 - 6
OFF
10 kΩ or higher
5 - 6
LO
Below 1 Ω
2 - 5 - 6
LO - M1
Below 1 Ω
2 - 5 - 6
M1
Below 1 Ω
1 - 2 - 5 - 6
M1 - M2
Below 1 Ω
1 - 5 - 6
M2
Below 1 Ω
1 - 4 - 5 - 6
M2 - HI
Below 1 Ω
4 - 5 - 6
HI
Below 1 Ω
Text in Illustration *a
Component without harness connected
(Air Conditioning Control Assembly)
Inspect illuminations.
Connect the positive (+) lead of the battery to terminal 8 and negative (-) lead to terminal 3. Check that the bulbs illuminate.
If a bulb does not illuminate, replace it.
