2014 Hilux · Service Manual ENGINE

P2226 Barometric Pressure Circuit

Diagnostic trouble codes · Vehicles built Aug 2013 – Jul 2014

Also covers:

Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 Aug 2013 – Jul 2014 from Aug 2014

DESCRIPTION

The ECM uses its built-in atmospheric pressure sensor to detect atmospheric pressure. Following the changes in the atmospheric pressure, the ECM corrects the fuel injection volume, timing and duration, and adjusts the common rail internal fuel pressure in order to optimize engine combustion.
DTC No.
DTC Detection Condition
Trouble Area
P2226
P2228
P2229
Atmospheric pressure sensor malfunction
(1 trip detection logic)
ECM

INSPECTION PROCEDURE

HINT:
Read freeze frame data using the intelligent tester. Freeze frame data records the engine conditions when a malfunction is detected. When troubleshooting, freeze frame data can help determine if the vehicle was running or stopped, if the engine was warmed up or not, and other data from the time the malfunction occurred.

NOTICE:
If the ECM is replaced, the new ECM needs initialization (Click here).


1. CHECK OTHER DTC OUTPUT (IN ADDITION TO DTC P2226 OR P2228 OR P2229)

Result:
Display (DTC output)
Proceed to
P2226 or P2228 or P2229
A
P2226 or P2228 or P2229 and other DTCs
B



B
GO TO RELEVANT DTC CHART (Click here)
A

REPLACE ECM (Click here)


← P2226 Barometric Pressure Circuit (+ P2228, P2229) (Aug 2012 – Jul 2013)P2226 Barometric Pressure Circuit (+ P2228, P2229) (from Aug 2014) →