2014 Hilux · Service Manual ENGINE

INSTALLATION

Removal / installation · Vehicles built Aug 2012 – Jul 2013

Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013


1. INSTALL IGNITION SWITCH ASSEMBLY

A111806
  1. Install the switch to the steering column bracket upper with the 2 claws.


2. CONNECT CONNECTOR

A112040
  1. Connect the 9 connectors as shown in the illustration.

  1. Secure the wire harness with the clamps.


3. INSTALL STEERING COLUMN COVER LOWER

H045606E01
  1. Install the cover lower with the 3 screws.

    HINT:
    Turn the steering wheel to the right and left as necessary to install the 3 screws and cover lower.


4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

5. PERFORM INITIALIZATION
Perform initialization (Click here).

NOTICE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.

← INSTALLATION (Jun 2011 – Jul 2012)INSTALLATION (from Aug 2013) →