REMOVAL
Removal / installation · Vehicles built from Jun 2011
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
| 2. REMOVE STEERING COLUMN COVER LOWER |
![]() ![]() |
Remove the 3 screws and cover lower.
- HINT:
- Turn the steering wheel to the right and left as necessary to remove the 3 screws and cover lower.
| 3. DISCONNECT CONNECTOR |
![]() ![]() |
Disconnect the 9 connectors and wire harness clamps from the steering column.
| 4. REMOVE IGNITION SWITCH ASSEMBLY |
![]() ![]() |
Detach the 2 claws and remove the switch from the steering column bracket upper.




