2014 Hilux · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from Jun 2011


INSPECT IGNITION SWITCH ASSEMBLY

A233212E01
  1. Measure the resistance of the switch.

    Standard resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    -
    LOCK
    10 kΩ or higher
    2 (ACC) - 4 (AM1)
    ACC
    Below 1 Ω
    1 (IG1) - 4 (AM1)
    2 (ACC) - 4 (AM1)
    5 (AM2) - 6 (IG2)
    ON
    Below 1 Ω
    1 (IG1) - 4 (AM1)
    3 (ST1) - 4 (AM1)
    5 (AM2) - 6 (IG2)
    5 (AM2) - 7 (ST2)
    START
    Below 1 Ω

    If the result is not as specified, replace the ignition switch assembly.

← REMOVAL (from Jun 2011)INSTALLATION (Jun 2011 – Jul 2012) →