2014 Hilux · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built Jun 2011 – Jul 2012

Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


2. REMOVE FRONT FENDER SEAL
  1. Remove the 5 clips and seal.


3. DISCONNECT CLUTCH RELEASE CYLINDER ASSEMBLY

G034223E01
  1. Remove the 2 bolts and disconnect the release cylinder.


4. REMOVE STARTER ASSEMBLY

  1. A122802
    Disconnect the starter connector.

  1. Remove the nut and disconnect the starter wire.

  1. Remove the clutch release cylinder.

  1. A122803
    Remove the 2 nuts, bolt, and disconnect the ground cable.

  1. Remove the starter.

← COMPONENTS (from Aug 2012)REMOVAL (Aug 2012 – Jul 2013) →