2014 Hilux · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built Aug 2012 – Jul 2013

Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


2. REMOVE FRONT FENDER SEAL
  1. Remove the 5 clips and ,front fender seal.


3. DISCONNECT CLUTCH RELEASE CYLINDER ASSEMBLY (for Manual Transmission)

G034223E01
  1. Remove the 2 bolts and disconnect the release cylinder.


4. REMOVE TRANSMISSION OIL FILLER TUBE SUB-ASSEMBLY (for Automatic Transmission)

G039346E01
  1. Remove the transmission oil level gauge.

  1. Remove the 2 bolts and oil filler tube.

  1. Remove the O-ring from the oil filler tube.


5. REMOVE STARTER ASSEMBLY

  1. A122802
    Disconnect the starter connector.

  1. Remove the nut and disconnect the starter wire.

  1. for Manual Transmission:

    1. A287490
      Remove the nut and bolt, and disconnect the ground cable.

  1. for Automatic Transmission:

    1. A122803
      Remove the 2 nuts and bolt, and disconnect the ground cable.

  1. Remove the starter assembly.

← REMOVAL (Jun 2011 – Jul 2012)REMOVAL (from Aug 2013) →