2014 Hilux · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built Aug 2012 – Jul 2013

Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


2. REMOVE FRONT FENDER SEAL
  1. Remove the 5 clips and seal.


3. DISCONNECT CLUTCH RELEASE CYLINDER ASSEMBLY (for Manual Transmission)

G034217E01
  1. Remove the 2 bolts and disconnect the release cylinder assembly.


4. REMOVE STARTER ASSEMBLY
  1. Disconnect the starter connector.

  1. Remove the nut and disconnect the starter wire.

  1. A122803
    Remove the 2 nuts, bolt, and disconnect the ground cable.

  1. Remove the starter.

← REMOVAL (Jun 2011 – Jul 2012)REMOVAL (from Aug 2013) →