REMOVAL
Removal / installation · Vehicles built from Aug 2013
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013
| 1.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
 |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 2.
REMOVE FRONT FENDER SEAL |
 |
Remove the 5 clips and seal.
| 3.
DISCONNECT CLUTCH RELEASE CYLINDER ASSEMBLY
|
 |
Remove the 2 bolts and disconnect the release cylinder.
| 4.
REMOVE STARTER ASSEMBLY |
 |
- Disconnect the starter connector.
Remove the nut and disconnect the starter wire.
- Remove the 2 bolts and disconnect the ground wire.
Remove the starter.