ON-VEHICLE INSPECTION
Inspection · Vehicles built from Jun 2011
| CHECK GLOW PLUG |
![]() ![]() |
Remove the screw grommet.
Measure the resistance of the glow plug.
- Standard resistance:
Tester Connection
Specified Condition
Glow plug terminal - Body ground
Approx. 0.95 Ω at 20°C (68°F)
- If the result is not as specified, replace the glow plug.
- NOTICE:
- Be careful not to damage the glow plug pipes, as this may cause an open circuit or shorten the life of the glow plugs.
- Do not allow oil or gasoline to contact the glow plug when cleaning it.
- Clean any oil on the terminal and bakelite washer with a dry cloth.
- Do not apply more than 11 V to the glow plug, as this may cause an open circuit.
- Be careful not to damage the glow plug pipes, as this may cause an open circuit or shorten the life of the glow plugs.


