REMOVAL
Removal / installation · Vehicles built from Jun 2011
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE EGR COOLER |
Remove the EGR cooler (Click here).
| 3. REMOVE NO. 1 GLOW PLUG CONNECTOR |
Remove the bolt and No. 2 intake manifold stay.
Remove the nut and wire harness.
Remove the 4 screw grommets, 4 nuts and glow plug connector.
| 4. REMOVE NO. 1 INTAKE MANIFOLD INSULATOR |
Remove the manifold insulator from the cylinder head.

| 5. REMOVE GLOW PLUG ASSEMBLY |
Using a 12 mm deep socket wrench, remove the 4 glow plugs.

