2014 Hilux · Service Manual ENGINE

ON-VEHICLE INSPECTION

Inspection · Vehicles built from Jun 2011


CHECK GLOW PLUG

A111828E01
  1. Remove the screw grommet.

  1. Measure the resistance of the glow plug.

    Standard resistance:
    Tester Connection
    Specified Condition
    Glow plug terminal - Body ground
    Approx. 0.95 Ω at 20°C (68°F)

    1. If the result is not as specified, replace the glow plug.

    NOTICE:
    1. Be careful not to damage the glow plug pipes, as this may cause an open circuit or shorten the life of the glow plugs.
    2. Do not allow oil or gasoline to contact the glow plug when cleaning it.
    3. Clean any oil on the terminal and bakelite washer with a dry cloth.
    4. Do not apply more than 11 V to the glow plug, as this may cause an open circuit.

← COMPONENTS (from Jun 2011)REMOVAL (from Jun 2011) →