2014 Hilux · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built from Jun 2011


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE EGR COOLER
  1. Remove the EGR cooler (Click here).


3. REMOVE NO. 1 GLOW PLUG CONNECTOR
  1. Remove the bolt and No. 2 intake manifold stay.

  1. Remove the nut and wire harness.

  1. Remove the 4 screw grommets, 4 nuts and glow plug connector.


4. REMOVE NO. 1 INTAKE MANIFOLD INSULATOR

  1. A148177
    Remove the manifold insulator from the cylinder head.


5. REMOVE GLOW PLUG ASSEMBLY

  1. A148178
    Using a 12 mm deep socket wrench, remove the 4 glow plugs.

← ON-VEHICLE INSPECTION (from Jun 2011)INSTALLATION (Jun 2011 – Jul 2012) →