REMOVAL
Removal / installation · Vehicles built from Jun 2011
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
| 2. REMOVE V-BANK COVER |
Remove the 2 nuts and cover.
| 3. REMOVE DRIVE BELT |
![]() ![]() |
While releasing the belt tension by turning the belt tensioner counterclockwise, remove the V-ribbed belt from the belt tensioner.
| 4. REMOVE GENERATOR ASSEMBLY |
![]() ![]() |
Disconnect the terminal cap.
Remove the 2 bolts, nut and generator wire.
Disconnect the generator connector.
Remove the 2 bolts and generator.



