REMOVAL
Removal / installation · Vehicles built Jun 2011 – Jul 2012
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 2. REMOVE AIR CLEANER ASSEMBLY |
w/ Mass Air Flow Meter:
Disconnect the mass air flow meter connector and detach the wire harness clamp.

Loosen the hose clamp, and then remove the air cleaner hose from the turbocharger.
Disconnect the ventilation hose and remove the 2 bolts and air cleaner.
w/o Mass Air Flow Meter:
Remove the clamp and disconnect the intake air temperature sensor connector.

Loosen the clamp of the turbocharger.
Slide the clamp and disconnect the ventilation hose.
Remove the 2 bolts and air cleaner.
| 3. REMOVE FAN AND GENERATOR V BELT |
Using the pulley set bolt of the tensioner, rotate the tensioner pulley clockwise to loosen the belt's tension. Then remove the V belt.

| 4. REMOVE GENERATOR ASSEMBLY |
![]() ![]() |
Remove the nut and generator wire.
Disconnect the generator connector.
Remove the 2 bolts and generator.

