REMOVAL
Removal / installation · Vehicles built from Aug 2013
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 2. REMOVE AIR CLEANER ASSEMBLY |
w/ Mass Air Flow Meter:
Disconnect the mass air flow meter connector and detach the wire harness clamp.


Text in Illustration *A
w/ Intercooler
*B
w/o Intercooler
Loosen the hose clamp, and then remove the No. 1 air cleaner hose from the turbocharger sub-assembly.
w/o Intercooler:
Slide the clamp and disconnect the ventilation hose from the cylinder head cover sub-assembly.Remove the 2 bolts and air cleaner assembly.
w/o Mass Air Flow Meter:
Detach the clamp and disconnect the intake air temperature sensor connector.

Loosen the hose clamp, and then remove the air cleaner hose from the turbocharger sub-assembly.
Slide the clamp and disconnect the ventilation hose from the cylinder head cover sub-assembly.
Remove the 2 bolts and air cleaner assembly.
| 3. REMOVE FAN AND GENERATOR V BELT |
Using the pulley set bolt of the tensioner, rotate the tensioner pulley clockwise to loosen the belt's tension. Then remove the V belt.

| 4. REMOVE GENERATOR ASSEMBLY |
![]() ![]() |
Remove the nut and generator wire.
Disconnect the generator connector.
Remove the 2 bolts and generator.

