INSTALLATION
Removal / installation · Vehicles built Aug 2012 – Jul 2013
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013
| 1.
INSTALL DIESEL THROTTLE BODY ASSEMBLY |
 |
Install a new gasket and the throttle body with the 2 bolts and 2 nuts.
-
Torque:
- 20 N*m{
204 kgf*cm
, 15 ft.*lbf
}
- Connect the 2 connectors.
| 2.
INSTALL CHARGE AIR COOLER ASSEMBLY WITH INTAKE AIR CONNECTOR |
 |
- Install the intake air connector to the air hoses.
Install the CAC with the 4 bolts.
-
Torque:
- 32 N*m{
326 kgf*cm
, 24 ft.*lbf
}
for bolt A
- 12 N*m{
125 kgf*cm
, 9 ft.*lbf
}
for bolts B, C and D
- Install a new No. 2 air hose and then tighten the 2 hose clamps.
-
Torque:
- 6.5 N*m{
66 kgf*cm
, 58 in.*lbf
}
- Tighten the 2 hose clamps of the No. 1 air hose.
-
Torque:
- 6.5 N*m{
66 kgf*cm
, 58 in.*lbf
}
- Connect the vacuum hose the the manifold absolute pressure sensor.
Connect the IAT sensor connector and manifold absolute diesel pressure sensor connector.
| 3.
INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY |
 |
Install the engine cover with the 3 bolts and 2 nuts.
-
Torque:
- 7.0 N*m{
71 kgf*cm
, 62 in.*lbf
}
| 4.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
|
| 5.
PERFORM INITIALIZATION |
 |
Perform initialization (Click here).
- NOTICE:
- Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.