REMOVAL
Removal / installation · Vehicles built from Aug 2013
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013
| 1. REMOVE INTERCOOLER ASSEMBLY |
| 2. REMOVE NO. 2 AIR CLEANER PIPE SUB-ASSEMBLY (w/o Intercooler) |
w/ No. 1 Engine Cover
Detach the 4 claws from the pins of the engine cover bracket and remove the No. 1 engine cover sub-assembly.

Text in Illustration *1
No. 1 Engine Cover Sub-assembly
*2
Claw
*3
Pin
Remove the 2 bolts and engine cover bracket.
Disconnect the manifold absolute pressure sensor connector.

Disconnect the vacuum hose from the gas filter.
Loosen the 2 clamps.
Remove the bolt and disconnect the No. 2 air cleaner pipe sub-assembly together with the 2 air hoses.
| 3. REMOVE DIESEL THROTTLE BODY ASSEMBLY |
Disconnect the 2 connectors.

Remove the 2 bolts, 2 nuts, diesel throttle body assembly and gasket.

