REMOVAL
Removal / installation · Vehicles built Jun 2011 – Jul 2012
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013
| 1.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
 |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
| 2.
REMOVE NO. 2 AIR CLEANER PIPE SUB-ASSEMBLY
|
 |
Disconnect the manifold absolute pressure sensor connector.
Disconnect the vacuum hose from the gas filter.
Loosen the 2 clamps of the No. 1 and No. 2 air hoses.
Remove the bolt and cleaner pipe together with the 2 air hoses.
| 3.
REMOVE VACUUM SWITCHING VALVE BRACKET |
 |
Remove the 2 connectors from the E-VRV and EGR valve.
Disconnect the vacuum hoses from the 2 locations.
Remove the 2 bolts and bracket.
| 4.
REMOVE DIESEL THROTTLE BODY ASSEMBLY
|
 |
- Disconnect the 2 connectors.
- Remove the 2 bolts, 2 nuts, throttle body and gasket.
| 5.
REMOVE THROTTLE BODY BRACKET |
 |
- Remove the 3 bolts and bracket.
| 6.
REMOVE INTAKE AIR CONNECTOR |
 |
Remove the 2 nuts, bolt, air connector and gasket.
| 7.
REMOVE NO. 1 EGR PIPE SUB-ASSEMBLY |
 |
- Remove the 2 bolts, 2 nuts, pipe and 2 gaskets.
| 8.
REMOVE EGR VALVE ASSEMBLY |
 |
Remove the EGR valve and gasket.