2014 Hilux · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built from Jun 2011


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.


2. REMOVE VACUUM SWITCHING VALVE (for EVAP)

  1. A112077
    Disconnect the VSV connector.

  1. Disconnect the 2 hoses from the VSV.

  1. Remove the bolt and VSV.

← COMPONENTS (from Jun 2011)INSPECTION (from Jun 2011) →