2014 Hilux · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from Jun 2011


INSPECT VACUUM SWITCHING VALVE (for EVAP)

  1. A110271E01
    Measure the resistance of the VSV.

    Standard resistance:
    Tester Connection
    Specified Condition
    1 - 2
    26 to 30 Ω at 20°C (68°F)
    1 - Body ground
    2 - Body ground
    10 MΩ or higher

    If the result is not as specified, replace the VSV.

  1. A099532E04
    Check operation of the VSV.

    1. Check that air does not flow from port E to port F.

    2. A110272E01
      Apply battery voltage across terminals 1 and 2.

    3. Check that air flows from port E to port F.
      If the result is not as specified, replace the VSV.

← REMOVAL (from Jun 2011)INSTALLATION (Jun 2011 – Jul 2012) →