2014 Hilux · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from Jun 2011


INSPECT AIR PUMP ASSEMBLY

  1. A110276E03
    Measure the resistance of the air pump.

    Standard resistance:
    Tester Connection
    Specified Condition
    1 - 2
    0.44 to 1.0 Ω at 20°C (68°F)
    1 - Body ground
    2 - Body ground
    10 MΩ or higher

    If the result is not as specified, replace the air pump assembly.

  1. A099547E03
    Check the operation of the air pump.

    1. Check that air does not flow from port A to port B.
      If the result is not as specified, replace the air pump assembly.

    2. A110277E01
      Apply battery voltage across terminals 1 and 2.

      NOTICE:
      1. Do not operate the air pump continuously for 5 seconds or more.
      1. When operating the air pump, wait until the pump has cooled down between each operation. If the pump has not cooled down sufficiently, the motor will burn out.

    3. Check that air flows from port A to port B.
      If the result is not as specified, replace the air pump assembly.

← REMOVAL (from Jun 2011)INSTALLATION (Jun 2011 – Jul 2012) →