REMOVAL
Removal / installation · Vehicles built from Jun 2011
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
| 2. REMOVE AIR CLEANER ASSEMBLY |
Disconnect the MAF meter connector.

Loosen the hose clamp.
Remove the 2 bolts and air cleaner.
| 3. DISCONNECT NO. 4 AIR HOSE |
Loosen the clamp and disconnect the No. 4 hose.

| 4. REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR |
Remove the 5 bolts and heat insulator.

| 5. REMOVE INTAKE PIPE INSULATOR |
Remove the 4 nuts, pipe and 2 gaskets.

| 6. REMOVE AIR SWITCHING VALVE ASSEMBLY |
Disconnect the connector.

Remove the 2 nuts and air switching valve.
