INSPECTION
Inspection · Vehicles built from Jun 2011
| INSPECT AIR SWITCHING VALVE ASSEMBLY |
 |
- Measure the resistance of the air switching valve.
- Standard resistance:
Tester Connection
|
Specified Condition
|
1 - 2
|
4.5 to 5.5 Ω at 20°C (68°F)
|
1 - Body ground 2 - Body ground
|
1 MΩ or higher
|
If the result is not as specified, replace the air switching valve assembly.
- Check operation of the air switching valve.
Check that air does not flow from port A to port B.
If the result is not as specified, replace the air switching valve assembly.
- Apply battery voltage across terminals 1 and 2.
Check that air flows from port A to port B.
If the result is not as specified, replace the air switching valve assembly.