INSTALLATION
Removal / installation · Vehicles built from Jun 2011
- HINT:
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
- Use the same procedure for the RH and LH sides.
| 1. INSTALL SIDE STEP SUB-ASSEMBLY LH |
for Extra Cab, for Double Cab:
Install the side step with the nut and 5 bolts.- Torque:
- 18 N*m{ 184 kgf*cm , 13 ft.*lbf }
for Single Cab:
Install the side step with the nut and 3 bolts.- Torque:
- 18 N*m{ 184 kgf*cm , 13 ft.*lbf }
